Maximum linearity and inductance symmetry for extended mid-band clarity
Ideal for two-ways and line array applications
The 10NTLW2500 represents the latest 18sound technology for high quality, low distortion applications. The Dual Gap technology comes directly from the Tetracoil motor structure and uses the same concept to maximize its benefits in terms of thermal dissipation and Bl symmetry to a wider frequency band, making the 10NTLW2500 the perfect component both as a woofer and a midbass, in a perfect power/weight ratio.
The brand new 2.5" Neo Dual gap motor linearizes inductance and minimizes heating and power compression thanks to the high coil surface that makes heat exchange twice as efficient than with standard single coil drivers.
The perfect balance we reached between the motor and the ultra linear M-roll suspension allows both very high excursion and extreme precision in the mid band with the lowest intermodulation distortion in the professional market.
This features, together with its extreme low weight (only 3.6 Kg) make the 12NTLW2500 the perfect component for highest quality line arrays and two/three way systems, thanks also to its 1000 watts power handling capabilities which put the NTLW2500 above the performances of 3" voice coils traditional speakers.
Specifications
Design
Parameters
Mounting and Shipping Info
Nominal Impedance8 Ω
Minimum Impedance5.5 Ω
Nominal Power Handling1500 W
Continuous Power Handling21000 W
Sensitivity396.5 dB
Frequency Range55 - 4500 Hz
Voice Coil Diameter64 mm (2.5 in)
Winding Materialcopper
Winding Depth19.7 mm (0.78 in)
Magnetic Gap Depth9.0 mm (0.35 in)
Surround ShapeM-roll
Cone ShapeCurvilinear
Magnet MaterialNeo
Pole DesignDual Gap
Woofer Cone TreatmentWeather protected
Recommended Enclosure20.0 dm3 (0.71 ft3)
Recommended Tuning70 Hz
Resonance Frequency65 Hz
Re5.0 Ω
Qes0.34
Qms11.2
Qts0.33
Vas21.0 dm3 (0.74 ft3)
Sd346.4 cm2 (53.69 in2)
η₀1.6 %
Xmax7.6 mm
Xvar7.4 mm
Mms49.0 g
Bl17.4 Txm
Le0.45 mH
EBP191 Hz
Overall Diameter260 mm (10.24 in)
Bolt Circle Diameter245 mm (9.65 in)
Baffle Cutout Diameter233.0 mm (9.17 in)
Depth157 mm (6.18 in)
Flange and Gasket Thickness9 mm (0.37 in)
Net Weight3.1 kg (6.83 lb)
2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.