Select Category
3

Productos

Productos
 
 
 
 
 
 
 
 
 
     
     
     
     
     
     
     
     
     
     
     
     
    20_26_44_992_18sound_21ntlw5000__photo_2_
    20_26_44_992_18sound_21ntlw5000__photo_1_
    Alternativas actuales:
    21NLW9601

    Características

    • 96,5 dB SPL 1W / 1m average sensitivity
    • Dual 115mm (4,5 in) Tetracoil Aluminum Voice coil
    • 4000 W program power handling
    • Ultra linear suspension behavior for excellent sound clarity
    • Symmetric flux density and inductance behaviour
    • Low noise forced air cooling design
    • Water repellent cone and epoxy coated plates
    • Suitable for vented, horn loaded and bandpass applications

    The 21NTLW5000 is a 21 inch diameter next generation high performance subwoofer, specifically designed for high SPL very low frequency applications in either a reflex, bandpass or horn loaded configuration. For optimum results we recommend the usage of power amplifiers able to deliver 4000W program power without clipping.

    The 21NTLW5000 uses Eighteen Sound proprietary Tetracoil technology, where two different, axially separated magnetic gaps and two inside-outside 4.5" diameter aluminum voice coils are wound on the same former and suspended evenly in the two magnetic gaps.

    The Tetracoil design key advantages are:
    1) a symmetric flux density versus displacement behavior, that minimizes the even distortion products;
    2) a very symmetric and flat inductance curve;
    3) the equivalent voice coil diameter of a 4.6" Tetracoil speaker is greater than 6". Consequently heat dissipation occurs over a larger surface area, driving AES power handling up to 1800 W.

    21NTLW5000 design features include a large displacement suspension system which, in conjunction with a fiberglass reinforced, straight ribbed cone allows an ultra-linear piston action and provides full mechanical control across the entire working range.

    In order to furtherly increase power handling and reduce power compression figure, a low density material air diffractor is placed into the backplate venting hole acting as a cooling system, increasing power handling capability and lowering the power compression figure.

    21NTLW5000 is able to perform properly under inclement weather conditions: the exclusive cone treatment improves pulp strength and gives water repellent properties to both sides of the membrane. In addition, magnetic structure metal plates coating is far more resistant than standard zinc coating to the corrosive effects of salts and oxidization.

    Especificación

    Diseño

    Parámetros

    Información de montaje y envío

    • Diámetro nominal533 mm ( in)
    • Impedancia nominal8 Ω
    • Impedancia minima6.8 Ω
    • Manejo de potencia nominal1800 W
    • Manejo de potencia continua4000 W
    • Sensibilidad97.0 dB
    • Rango de frecuencia30 - 1800 Hz
    • Diámetro de la bobina115 mm (4.5 in)
    • Profundidad del devanado42.5 mm (1.67 in)
    • profundidad magnética15.0 mm (0.59 in)
    • Recinto recomendado200.0 dm3 (7.06 ft3)
    • Sintonía recomendada33 Hz
    • Frecuencia de resonancia31 Hz
    • Re5.3 Ω
    • Qes0.38
    • Qms5.2
    • Qts0.36
    • Vas270.0 dm3 (9.53 ft3)
    • Sd1662.0 cm2 (257.61 in2)
    • Xmax17.5 mm
    • Mms372.0 g
    • Bl32.0 Txm
    • Le1.6 mH
    • EBP81 Hz
    • Diámetro total545 mm (21.46 in)
    • Diámetro de circunferencia de los tornillos520 mm (20.47 in)
    • Diámetro de la perforación en el baffle492.0 mm (19.37 in)
    • Profundidad320 mm (12.6 in)
    • Espesor del reborde y junta18 mm (0.71 in)
    • Peso neto12.5 kg (27.56 lb)
    • Peso del envío13.5 kg (29.76 lb)
    • Caja de envío570x570x350 mm (22.44x22.44x13.78 in)
      • Credits
      • Privacy Policy
      • Eighteen Sound P.IVA/VAT IT02577810357