100mm (4in) ISV Tetracoil technology for maximum power handling
45 mm (1,77 in) peak to peak excursion
Symmetric flux density and inductance behaviour
Straight ribbed, water repellent composite cone
Suitable for vented, horn loaded and bandpass subwoofer designs
The 15TLW3000 is an 15 inch diameter high performance subwoofer, specifically designed for high SPL subwoofer applications in either a reflex, bandpass or horn loaded configuration. For optimum results we recommend the usage of power amplifiers able to deliver 3600W program power without clipping
The 15TLW3000 uses Eighteen Sound proprietary Tetracoil technology, where two different, axially separated magnetic gaps and two inside-outside 4" diameter voice coils are wound on the same former and suspended evenly in the two magnetic gaps.
The Tetracoil design key advantages are:
1) a symmetric flux density versus displacement behavior, that minimizes the even distortion products;
2) a very symmetric and flat inductance curve;
3) the equivalent voice coil diameter of a 4" Tetracoil speaker is greater than 6". Consequently heat dissipation occurs over a larger surface area, driving AES power handling up to 1500 W.
15TLW3000 design features include a large displacement suspension system which, in conjunction with a fiberglass reinforced, straight ribbed cone allows an ultra-linear piston action and provides full mechanical control across the entire working range.
In order to furtherly increase power handling and reduce power compression figure, a low density material air diffractor is placed into the backplate venting hole acting as a cooling system, increasing power handling capability and lowering the power compression figure.
15TLW3000 is able to perform properly under inclement weather conditions: the exclusive cone treatment improves pulp strength and gives water repellent properties to both sides of the membrane. In addition, magnetic structure metal plates coating is far more resistant than standard zinc coating to the corrosive effects of salts and oxidization.
Especificación
Diseño
Parámetros
Información de montaje y envío
Diámetro nominal380 mm ( in)
Impedancia nominal4 Ω
Impedancia minima3.6 Ω
Manejo de potencia nominal1500 W
Manejo de potencia continua3000 W
Sensibilidad95.0 dB
Rango de frecuencia48 - 2200 Hz
Diámetro de la bobina100 mm (4.0 in)
Recinto recomendado100.0 dm3 (3.53 ft3)
Sintonía recomendada50 Hz
Frecuencia de resonancia44 Hz
Re2.5 Ω
Qes0.41
Qms9.8
Qts0.39
Vas80.0 dm3 (2.83 ft3)
Sd881.0 cm2 (136.56 in2)
η₀1.6 %
Xmax9.0 mm
Mms177.0 g
Bl18.0 Txm
Le1.0 mH
EBP107 Hz
Diámetro total393 mm (15.47 in)
Diámetro de circunferencia de los tornillos371 mm (14.61 in)
Diámetro de la perforación en el baffle354.0 mm (13.94 in)
Profundidad245 mm (9.65 in)
Espesor del reborde y junta12 mm (0.47 in)
Peso neto12.5 kg (27.56 lb)
Peso del envío13.5 kg (29.76 lb)
Caja de envío400x400x260 mm mm (15.75x15.75x10.24 in)
