Select Category
3

Products Archive

Products
 
 
 
 
 
 
 
 
 
 
 
 
 
     
     
     
     
     
     
     
     
     

    8.0 In

    8MB400

    8MB400

    8.0 In

     
    Rcnb4ulp
    Alternative/Current Model:
    8MB500

    Features

    • 95 dB SPL 1W / 1m average sensitivity
    • 51 mm (2 in) Interleaved Sandwich Voice coil (ISV)
    • 280 Watt AES power handling
    • Improved heat dissipation via unique basket design
    • Weather protected cone
    • Suitable for compact two way and multiway systems
    The 8MB400 mid-bass transducer has been developed in response to a specific market requirement for a 200 mm (8 in) midbass driver which combines excellent linearity with good efficiency and power handling capabilities. It is primarily intended for use as a midbass driver in compact 2-way reflex enclosures with a 1 inch compression
    driver or tweeter but as a result of its versatile characteristics, it can also be used in multiway systems.
    The curvilinear, treated paper cone is formed using a unique wood pulp composition designed to achieve the best possible rigidity and stiffness. This is carried by a polycotton multiroll surround to provide increased excursion whilst controlling break up modes.
    The 50 mm (2 inch) aluminum wire voice coil employs same Interleaved Sandwich Voice coil (ISV) technology. It is composed of a high strength fiberglas former carrying windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly which, in conjunction with the
    highly advanced design of the magnetic structure, provides a high force factor or BL.
    The voice coil is cooled by incorporating airways between the chassis back plate and the magnetic top plate to channel heated air away from the voice coil and gap and dissipate it.
    In-house FEA CAD facilities have been used to optimise flux density and BL factor within the air gap.
    Due to the increasing use of sound systems at outdoor events, the 8MB400 ability to perform in humid environments is a key feature.
    This has been achieved using an exclusive cone treatment which renders the cone resistant to humidity.

    Specifications

    Design

    Parameters

    Mounting and Shipping Info

    • Nominal Diameter200 mm ( in)
    • Nominal Impedance8 Ω
    • Nominal Power Handling1280 W
    • Continuous Power Handling2400 W
    • Sensitivity395.0 dB
    • Frequency Range55 - 5200 Hz
    • Voice Coil Diameter50 mm (2.0 in)
    • Winding Materialaluminum
    • Surround ShapeM-roll
    • Cone ShapeCurvilinear
    • Magnet MaterialFerrite
    • Woofer Cone TreatmentWeather protected
    • Recommended Enclosure25.0 dm3 (0.88 ft3)
    • Recommended Tuning70 Hz
    • Resonance Frequency64 Hz
    • Re5.0 Ω
    • Qes0.43
    • Qms3.23
    • Qts0.38
    • Vas23.9 dm3 ( ft3)
    • Sd227.0 cm2 (35.19 in2)
    • Xmax5.8 mm
    • Mms18.0 g
    • Bl9.3 Txm
    • Le0.96 mH
    • EBP148 Hz
    • Overall Diameter210 mm (8.27 in)
    • Bolt Circle Diameter195 mm (7.68 in)
    • Baffle Cutout Diameter186.0 mm (7.32 in)
    • Depth99 mm (3.9 in)
    • Flange and Gasket Thickness14 mm (0.55 in)
    • Net Weight3.6 kg (7.94 lb)
    • Shipping Weight3.92 kg ( lb)
    • Shipping Box235 x 235 x 150 mm (9.25x9.25x5.91 in)
    • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated nominal impedance. Loudspeaker in free air.
    • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
    • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.